Rheem 2-stage Manual de Utilização e Manutenção descarregar pdf

USER’S INFORMATION MANUAL

UPFLOW/HORIZONTAL & DOWNFLOW TWO STAGE

INDUCED DRAFT GAS FURNACES

ecognize this symbol as an indication of Important Safety Information!

— Do not store or use gasoline or other

flammable vapors and liquids, or other

combustible materials in the vicinity of

this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch;

do not use any phone in your

building.

• Immediately call your gas supplier

from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas

supplier, call the fire department.

• Do not rely on smell alone to detect

leaks. Due to various factors, you may

not be able to smell fuel gases.

• A U. L. recognized fuel gas and CO

detector(s) are recommended in all

applications, and their installation should

be in accordance with the

manufacturer’s recommendations and/or

local laws, rules, regulations or codes.

— Installation and service must be

performed by a qualified installer,

service agency or the gas supplier.

If the information in this manual is not followed exactly,

a fire or explosion may result, causing property

damage, personal injury or loss of life.

WARNING

92-20802-93-02

SUPERSEDES 92-20802-93-01

DO NOT DESTROY. PLEASE READ CAREFULLY AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

FOR YOUR SAFETY

IMPORTANT: READ THESE

INSTRUCTIONS THOROUGHLY

BEFORE ATTEMPTING TO OPERATE

THIS FURNACE.

This furnace has been designed to

give you many years of efficient,

dependable home comfort. With

annual maintenance, this furnace will

operate satisfactorily year after year.

Please read this manual to familiarize

yourself with operation, routine

maintenance schedule, and safety

procedures.

DEVICES ATTACHED TO THE FLUE

OR VENT FOR THE PURPOSE OF

REDUCING HEAT LOSS UP THE

CHIMNEY, INCLUDING FIELD-

INSTALLED DRAFT INDUCERS,

HAVE NOT BEEN TESTED AND

HAVE NOT BEEN INCLUDED IN THE

DESIGN CERTIFICATION OF THIS

FURNACE. WE, THE MANUFAC-

TURER, CANNOT AND WILL NOT BE

RESPONSIBLE FOR INJURY OR

DAMAGE CAUSED BY THE USE OF

SUCH UNTESTED AND/OR

UNCERTIFIED DEVICES,

ACCESSORIES OR COMPONENTS.

SAFETY

IMPROPER INSTALLATION,

ADJUSTMENT, ALTERATION,

SERVICE OR MAINTENANCE CAN

CAUSE PROPERTY DAMAGE,

PERSONAL INJURY OR DEATH.

FOR ASSISTANCE OR ADDITIONAL

INFORMATION CONSULT A

QUALIFIED INSTALLER, SERVICE

AGENCY OR THE GAS SUPPLIER.

OBSTRUCTION OF THE AIR VENT

ON AN LP (PROPANE) TANK

REGULATOR CAN CAUSE

EXPLOSION OR FIRE RESULTING IN

PROPERTY DAMAGE, SEVERE

PERSONAL INJURY OR DEATH.

YOUR GAS SUPPLIER SHOULD

PERIODICALLY INSPECT AND

CLEAN THE AIR VENT SCREEN TO

PREVENT ANY OBSTRUCTION.

KEEP PROTECTIVE REGULATOR

COVER IN PLACE, AS EXPOSURE

TO THE ELEMENTS CAN CAUSE

ICE BUILDUP AND REGULATOR

FAILURE.

CAREFULLY FOLLOW THESE

SAFETY RULES:

1. Do not place combustible material

on or against the furnace jacket.

Keep the area around the furnace

clear and free of all combustible

materials including gasoline and

other flammable vapors and

liquids.

2. A furnace installed in an attic or

ther insulated space must be kept

free and clear of insulating

material. Examine the furnace area

when installing the furnace or

adding more insulation. Some

materials may be combustible.

3. To prevent carbon monoxide

poisoning, replace all blower doors

and compartment covers after the

furnace is serviced. Do not operate

the unit without all panels and

doors securely in place.

4. Should overheating occur, or the

gas valve fail to shut off the gas

supply, turn off the manual gas

valve to the furnace before turning

off the electrical supply.

5. Any additions, changes or

conversions required in order for

the furnace to satisfactorily meet

the application needs should be

made by a qualified installer,

service agency or the gas supplier,

using factory specified or approved

parts. Read your WARRANTY.

Contact the WARRANTOR for

conversion information. This

furnace was equipped at the

factory for use on NATURAL GAS

ONLY. Conversion to L.P. GAS

requires a special kit supplied by

the WARRANTOR.

6. A furnace needs an adequate

supply of combustion and

ventilation air for proper and safe

operation. Do not block or obstruct

air openings on the furnace or air

openings supplying the area where

the furnace is installed. Do not

store anything around the furnace

that could block the flow of fresh air

to the unit. Your installation may

receive air from the inside heated

space, from the outside, from the

attic or crawl space. Whenever

adding insulation, be sure the air

supply openings are not covered.

7. Replace the furnace if any part has

been under water.

WARNING

1 2 3 4 5 6 7 8

Resumo do Conteúdo

Página 1 - USER’S INFORMATION MANUAL

USER’S INFORMATION MANUALUPFLOW/HORIZONTAL & DOWNFLOW TWO STAGEINDUCED DRAFT GAS FURNACESRecognize this symbol as an indication of Important Safet

Página 2 - GENERAL INFORMATION

2GENERAL INFORMATIONFIGURE 1MIGRATION OF DANGEROUS SUBSTANCES, FUMES, AND ODORS INTO LIVING SPACESDUCT LEAKS CAN CREATE ANUNBALANCED SYSTEM AND DRAWPO

Página 3 - RECEIVING

IMPORTANT INFORMATIONABOUT EFFICIENCY ANDINDOOR AIR QUALITYCentral cooling and heating equipmentis only as efficient as the duct systemthat carries th

Página 4 - SYSTEM OPERATION INFORMATION

4SYSTEM OPERATION INFORMATION1. Keep the air filters clean. Yourheating system will operate moreefficiently and provide betterheating, more economical

Página 5

54. Turn the gas control knob to the“OFF” position, or depress the gascontrol lever and move to the“OFF” position.5. Replace the control door.SEQUENCE

Página 6 - PFLOW FILTER LOCATION

6DOWNFLOW FILTER SIZESFURNACE INPUTWIDTH BTUH (K)SIZE QTY.14ⴖ 50 14ⴖ x 20ⴖ 1171⁄2ⴖ 75 & 100 12ⴖ x 20ⴖ 221ⴖ 100 12ⴖ x 20ⴖ 2241⁄2ⴖ 125 & 150 14ⴖ

Página 7 - MAINTENANCE

7DOWNFLOW FURNACE - FILTERSIN TOP DUCT LOCATION1. Remove the blower compartmentaccess door.2. Push up and in on the filters todisengage from retaining

Página 8 - CM 08108

CM 08108